2016 Hunter Scooter Victa the L1l Sh1t

Rust effect was achieved by using Porters Rust Effect. Then chalk was applied. Then coats of clear.
Battery box was removed. Battery was then mounted down low and encased in an old Champion Spark plug box.
Fence palings used for the under seat/above engine cover.
Seat is an pillion seat off a CBR900.
Handlebars old Suzuki GS125 ones turned upside down.
Grips wrapped in hemp twine.
Headlight is off an old chopper.
Indicators are LED water flow type.
Tail light round LED mounted in a Honda CL450 exhaust clamp.
Shrunken skull has real possum leg bones. One pushed through the nose and one tied up in the long hair.
Forks painted black.
Fork springs replaces with cut down Yamaha DT100 springs to give a stiffer feel to the front end.
Old army bag used in place of the battery box.
Ammo pouches pitted on the side just because.
CVT clutch was replaced with a racing clutch. Plus light sliders. it flies off the line with this mod.
White wall affect on the rear tyre is just cream enamel which has flaked off to make it look even more aged.
Hillman Hunter emblem fitted to the front plate . Hunter scooter Hillman Hunter. Get it. 😉
Holden starts also fitted to the front plate.
Footpegs removed. Floor boards made from fence palings. These are mounted to an old set of Bark Buster guards.
Victa lawnmower badge added to the army bag.
Old valve tap turner fitted to fuel cap.
Fork gaiter added.
Bare end mirrors fitted.
Sidestand made from an old spanner.
Rear guard made from old weathered steel strips with an old Yamaha DT100 mud flap then fitted under that.
Number plate fitted to an bracket that runs off the swing-arm. This also works as a mud flap.
Exhaust header wrapped in old header wrap. Muffler was painted black then distressed to make it look old.
Various sticker and badges added.
Ans so many other small things that i can’t think of at the moment.

Comments are closed.