Bringing you the world's best cafe racers, trackers, scramblers, bobbers & custom motorcycles.


Yamaha XS650 – Kick Moto

Posted on September 29, 2015 by Andrew in Café Racer, Scrambler. 4 comments


There are a lot of memes floating around the internet about Mum’s basements and not a single one of them kind. Often the domain of keyboard warriors and 40-year-old virgins, finally we’ve made a basement discovery from those dark depths that’s worth paying attention to. The fine lads from KickMoto in Halifax, Nova Scotia had a customer who was after a clean Yamaha XS650. As fate would have it, a friend of the workshop just so happened to have a stash of XS650’s stored in his mother’s downstairs you-know-what.


Yamaha XS650 – Motogadgets

Posted on August 24, 2015 by Andrew in Tracker. 20 comments


Dust off the drafting table, refill the clutch pencil and grab the dividers. Retired Dutch Architect Henk Woltjer has teamed up with local shop Motogadgets to create the perfect motorcycle to relive his youth; it’s a millimetre-exact Yamaha XS650 tracker inspired by the first bike he built some thirty years earlier.


Yamaha XS650 by Holiday Customs

Posted on May 20, 2015 by Scott in Bobber, Classic. 22 comments


Words by Ian Lee.

If it wasn’t for the last minute, nothing would get done. Whether a Pipeburn post, or project bike, there is nothing like the rush of racing that deadline for completion. Just ask Jared Johnson of Holiday Customs. The bike featured here today had the final touches put on it at 10pm on the night before The One Motorcycle Show. Utilising a UJM for his entry into the legendary Portland bike show, Jared gave the 1975 XS650 the Schwinn styled frame that the Holiday workshop is famous for.


‘75 Yamaha XS650 – Maccomotors

Posted on February 9, 2014 by Andrew in Brat. 5 comments


If you’ve got any lingering doubts about the 21st Century custom motorcycle scene not being a truly global affair, then prepare to have them squashed like the model buildings in a Godzilla movie. This, the 4th Maccomotors bike to feature on Pipeburn, is the product of no less than four different countries; namely Spain, Mexico, the UK and Japan. And although you might assume that such an international affair might end up looking like a poster child for design-by-committee, we’re here to tell you it’s turned out quite the opposite. Say ‘hola’ to ‘The Mexican’.


1977 Yamaha XS650 – ‘Escape Machine’

Posted on December 20, 2013 by Scott in Bobber. 41 comments

Hill Hudson is a talented young illustrator studying at the Pacific Northwest College Of Art in Portland, Oregon. This year he had to complete his senior thesis, which usually involves doing an illustration. But Hill wanted to do something a little different and build a motorcycle. “I guess I’m the first to ever do this in the history of the 100 plus years the school as been running” he says. “This thesis will be documented and stored in the library here in Portland and will go down as the first art school breakdown and construction of a motorcycle in a gallery setting at this school”. Hill’s project started by searching for a suitable low cost donor. He eventually found a 1977 XS650 that was the perfect ‘blank canvas’ for his art project and got to work. 


Yamaha XS650 – Kott Motorcycles

Posted on August 15, 2013 by Scott in Café Racer, Classic. 26 comments

Written by the builder, Dustin Kott from Kott Motorcycles.

Years ago I rode a 1972 XS650, also known as the XS2 from Los Angeles, California to Sturgis, South Dakota. I was wearing a cheap rain suit from Walmart in the pouring rain going at least 100 MPH to dodge the inclement weather. When I stopped at a gas station some locals took one look at me and said “you were going so fast that your damn clothes are tearing off! You passed us like we were standing still!” These are my memories of the infamous XS650 made famous by the legendary Kenny Roberts


Yamaha XS650 – ‘YABSA’

Posted on April 25, 2013 by Scott in Café Racer. 26 comments

Written by Ian Lee.

Some bike builders are like magicians. They take particular props, put them together and ‘hey presto’, produce something you didn’t think was possible. A mixture of new and old componentry on a bike build is an example of this. If you lean too far one way, or the other, you can ruin the concept of a build. Or at the very least, while trying to put a new image on an bygone concept, you have the motorcycle equivalent of David Hasselhoff. Roberto Totti and the team at Hook Motors have what it takes to mix new with old, and with over thirty years of experience in Robert alone, you can see the professionalism put into their builds. The Yabsa is one such bike, with a few different motorcycles, from a few different eras donating componentry, and the end result is magic.


Busch & Busch’s ‘79 Yamaha XS650 – “The Ridgit”

Posted on March 16, 2013 by Andrew in Bobber. 29 comments

For many of us, families are like French truffles. They cost you all your cash, they are hard to find when you need them, and they are a very acquired taste. But for a lucky few, they turn out to be friends, inspiration, and trustworthy business partners all in one. The kind of relationship most bike builders who find themselves going it alone could only dream about. But for Danny and Lance Busch of Busch & Busch in Reno, Nevada, it’s an everyday reality. Since dreaming up the idea of a custom shop in High School and even printing t-shirts for it in art class, they’ve progressed to, well, to what you see here. Because what I see here is one of my all-time favourite XS’s. And that’s no Busch.


Yamaha XS650 – Holiday Customs

Posted on March 8, 2013 by Scott in Bobber. 42 comments

Jared Johnson from Holiday Customs has certainly got his own distinctive look going on. This is the third generation of his curved, Schwinn inspired XS650. The first one he kept for himself, the second one was sold to Alex Turner from the Arctic Monkeys, and the third, which we are featuring today was recently built for The One Motorcycle Show. The first one took around three months to build, the second took two months and the third he was able to complete in one month, due to the pressure of finishing it in time for The One Motorcycle Show. Jared picked up the donor XS650 in his home town of Portland. “It wasn’t much” he says. “Just an engine and frame, but I had everything else around the shop.” So with only a month to have it finished, he got wrenching.


Desert Motorcycle Company’s ’81 Yamaha XS650 – “Golden Spike”

Posted on August 19, 2012 by Andrew in Bobber, Classic. 28 comments

Yamaha‘s XS650. It seems like there’s not a single style or genre that it can’t morph itself into. Chopper, bobber, rat, brat, cafe, tracker – hell, I’ve even seen it do a decent board tracker. It’s like some Japanese designers in the 1960s locked themselves in a room with a load of bad drugs, a Swiss Army Knife, a rubber mask from mission impossible, Optimus Prime, a doppelganger, the liquid metal robot from Terminator 2 and one of their mates who liked to wear his wife’s underwear on the weekends and exploded out three weeks later with blueprints that would transform the way the world thought of Japanese bikes and the way we think about a custom bike platform. Of course, this one is no different. It’s the retro brainchild of one Greg Hebard from Salt Lake City, Utah, and as you can see it looks about as close to the original bike as night looks like day.